 |
 |
 |
|
Product Features
 Specs and requirements
Operation Manual
Installation Instructions
*Remote locate the Network Bridge Harness sold separately
Kohler OnCue Generator Management System
OnCue Features
Check your Kohler generator status via a computer.
Access from multiple computers via the Internet.
Start or stop your generator set from your computer.
Clear faults from your computer. (ADC 2100 only).
Receive generator set start/stop and fault messages by email
or SMS text message. *
See balloon-tip fault messages on your PC indicating
generator set faults.
View time- and date-stamped event history listing generator
set starting and stopping, faults, and notifications.
Remote start/stop functions are password protected.
Bridge can be mounted inside the generator set enclosure or
inside your home (maximum distance 36.6 m [120 ft.]).
OnCue software runs automatically after the PC is restarted
or rebooted.
* Computer must be running to send email or text messages. Cable or DSL
modem for Internet access required.
Applicable Models
17/18RES with ADC-RES control
*Not Compatible with RESL units
View Generator Operation Data
Generator set running or stopped
Generator output voltage, VAC
Generator output frequency, Hz
Engine speed, RPM
Engine temperature, F (ADC 2100 only)
Engine starting battery voltage, VDC
Engine runtime, hours
Fault indication with description
Balloon-tip notification of faults when the user interface is
minimized
Generator operation event history
Network Bridge Specifications
Environmental specifications:
Operating temperature: --40C to 70C (--40F to 158F)
Storage temperature: --40C to 85C (--40F to 185F) Humidity: 5--95% non-condensing
Power requirements:
Powered by the generator set engine starting battery
Maximum power draw 2.5 W
8--36 VDC with fuse protection
Standard RJ45 jack for network connection
Terminal block for generator connection (harness provided)
Status-indicating LEDs
Standard 10/100 Ethernet
FCC Class A compliant
Dimensions, L x W x H, mm (in):
111 x 79 x 32 (4.4 x 3.1 x 1.25)
Weight: 0.5 kg (1 lb.)
OnCue System Kit
OnCue network bridge with mounting hardware
OnCue network bridge to control harnesses
OnCue software CD-ROM
Installation instructions
Operation manual
Optional extension harnesses for remote bridge installation
(maximum 36.6 m [120 feet]) are available separately
System Requirements
Personal computer (PC) with Microsoft Windows Vista or
Windows XP
512 MB of RAM
Up to 500 MB of available hard disk space may be required
Always-on Internet access (for example, cable or DSL
Internet service)
Internet router and network cable for network bridge
connection to Ethernet
UPS backup to maintain computer power recommended
Microsoft, Windows XP, and Windows Vista are registered trademarks
of Microsoft Corporation.
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
United States
