Product Features
 Load Shed A/C Plus Specifications
Load Shed A/C Plus Installation Manual
Load Shed A/C Installation Kit
Warranty
**Requires 1 Install Kit Model 2157 Instead of sizing a generator to power two or more air conditioners to run at
the same time, use the Load Shed A/C on a smaller generator and still have all
the air conditioning.
Save $thousands$ with the Load Shed A/C by reducing
the size generator needed to power your air conditioning during an outage. Model 2161
Each LOAD SHED A/C PLUS 30A™ rotates 2 air
conditioners on 2 adjustable timers and turns off any size load up to 30 Amps up
to 600V automatically while on an automatic generator.
Up to 9 Load Sheds may
be connected to each generator system, controlling up to 18 air conditioners and
1 2-pole circuit at once!
The Load Shed A/C Plus is meant to reduce loads to match the
generator supply.
Nema 1 Enclosure
Shipping Weight: 12lb's
Dimensions: 10"T x 8"W x 4"D
Installation Information:
The Load Shed A/C Plus requires 2 Installation Kits, 1 conduit and 2 low
voltage thermostat wires.
- A control line from the transfer switch to the Load Shed A/C.
- 1-pole or 2-pole circuit that you want off during generator
operation.
- Thermostat wire – Only 1 wire is needed from each thermostat. That 1 wire
from each thermostat is normally closed in utility and opens and closes on two
adjustable timers during an outage using the Load Shed A/C on a generator with
an automatic transfer switch.
Manufacturer: All Professional Industries
|
