• Kohler Co. provides one-source responsibility for the generating system and accessories.
• The generator set and its components are prototype-tested, factory-built ,and production-tested.
• The 60 Hz generator set offers a UL 2200 listing.
• The generator set accepts rated load in one step.
• The 60 Hz generator set meets NFPA 110, Level 1, when equipped with the necessary accessories and installed per NFPA standards.
• A one-year limited warranty covers all systems and components. Two-, five-, and ten-year extended warranties are also available.
• Shipped without anti-freeze.
  

Alternator features:

• The unique Fast-Response II excitation system delivers excellent voltage response and short circuit capability using a permanent magnet (PM)-excited alternator.
• The brushless, rotating-field alternator has broad range reconnectability.
• NEMA MG1 ,IEEE, and ANSI standards compliance for temperature rise and motor starting.
• Sustained short-circuit current of up to 300% of the rated current for up to 10 seconds.
• Sustained short-circuit current enabling down stream circuit breakers to trip without collapsing the alternator field.
• Self-ventilated and dripproof construction.
• Vacuum-impregnated windings with fungus-resistant epoxy varnish for dependability and long life.
• Superior voltage waveform from a two-thirds pitch stator and skewed rotor.
• Fast-Response(TM) II brushless alternator with brushless exciter for excellent load response.

Other features:

• Controllers are available for all applications.
• The electronic, isochronous governor incorporates an integrated drive-by-wire throttle body actuator delivering precise frequency regulation.

Prime Ratings:		91 kW (114 kVa)
Standby Ratings:		100 kW (125 kVa)
Hertz:		60 Hz
Alternator Type:		Brushless, Permanent-Magnet
Engine Manufacturer:		General Motors
Engine Model:		Industrial Powertrain Vortec 8.1L
Cylinder Arrangement:		V-8
Max Power at Rated RPM:		121 kWm (162 BHP)
Prime Fuel Consumption at
100% load:		30.2 m³/hr (1065 cfh)
75% load:		24.1 m³/hr (852 cfh)
50% load:		19.7 m³/hr (694 cfh)
25% load:		12.6 m³/hr (447 cfh)
Standby Fuel Consumption at
100% load:		33.0 m³/hr (1164 cfh)
75% load:		25.3 m³/hr (893 cfh)
50% load:		21.1 m³/hr (745 cfh)
25% load:		13.2 m³/hr (466 cfh)